Top 9 Pipe Fitter Tools – Pliers

As an Amazon Associate I earn from qualifying purchases.

1. Strong Hand Tools

#ad

Quick Release Trigger, Removable 36 Chain, Hold Up To 10.5" Diameter Pipe, Strong Hand Tools PFC1036 Locking Chain Pliers, Unique Easy Open Crank Handle

#adStrong Hand Tools #ad - Secure adjustment Bar minimizes bar pop-outs. Non-slip grip marks on top and bottom jaws for positive gripping. Unique crank handle for fast, easy jaw opening and pressure adjustment. Quick release trigger. 36″ 910 mm chain.

Brand	Strong Hand Tools #ad
Manufacturer	Strong Hand Tools #ad
Height	2 Inches
Length	13 Inches
Width	6 Inches
Part Number	VAL-PFC1036
Model	PFC1036

2. Calculated Industries

#ad

Sprinklerfitters and Welders | Built-in Pipe Data for 7 Materials , Calculated Industries 4095 Pipe Trades Pro Advanced Pipe Layout and Design Math Calculator Tool for Pipefitters, Steamfitters, White

#adCalculated Industries #ad - Just what the journeyman pipe fitter needs; spend less time looking at charts and quickly calculate using built-in pipe data that lets you choose from 7 different pipe material and types. Dedicated functions help you solve intricate pipe runs; if you have ever laid out a rolling offset, advance or roll. This calculator does all of these things for you and includes fitting angles, you know it is a challenge especially when using unknown angles or fittings that have to be cut to make a specific travel, slopes, percent grades and drops.

Comes with a rugged shock, dust and moisture-resistant Armadillo Gear protective case, pocket reference guide, two long-life batteries and a full one-year limited. Just enter size to get diameter, wall thickness and filled weight per foot as well as internal area; use it for bending tube and figuring offsets and more. Simplify complete building layout with almost no need for a blue book, this calculator handles plumbing and metric unit conversions at the push of a button, it does everything but cut the pipe for you; enter data in feet-inch-fractions or decimals just as you would say the measurement; plus, works as both a standard and trigonometry calculator.

Get instant answers for all your pipe layout and design problems so you can get to building; when you use the Pipe Trades Pro together with measurements from blue prints you know the end result will be right; it calculates right angles, parallel pipe cutbacks, fitting angles, bends, weight or volume conversions, offsets, flow rates and more. Invaluable' tool pays for itself daily by reducing headaches, saving time and preventing expensive material errors on all your projects, from the office to the field.

Brand	Calculated Industries #ad
Manufacturer	Calculated Industries #ad
Height	0.6 inches
Length	5.6 inches
Weight	0.5 pounds
Width	3 inches
Part Number	4095
Model	4095
Warranty	Full 1-year limited warranty

3. Strong Hand Tools

#ad

Strong Hand Tools PG622V 6" Pipe Plier, 1"–2" Clamping Capacity, Two Fixed V-Pads, M8 Thread, 2" Throat Depth

#adStrong Hand Tools #ad - Throat depth: 2″ 50 mm. 6″ 150 mm. Thread: M8. Opening: 1″ – 2″ 25 – 50 mm. Top v-pad: fixed. Bottom v-pad: fixed.

Brand	Strong Hand Tools #ad
Manufacturer	Strong Hand Tools #ad
Height	2 inches
Length	12 inches
Weight	0.03 Pounds
Width	4 inches
Part Number	VAL-PG622V
Model	PG622V

4. Gersoniel

#ad

Silver, 2 Pcs Welders Pencil with 48 PCS Round Refills Mechanical Pencils Metal Welding Marker for Tube Pipe Fitter Welder Steel Construction Woodworking Red

#adGersoniel #ad - Simple to use: each welders pencil has a built in sharpener, convenient for you to sharpen the refill quickly, and the top has a clip that can be fixed to clothing, bringing you a lot of convenience.

Erasable and conspicuous: these pencil refills are water soluble and can be wiped with wet cloth when you mark wrong or make the original place more beautiful and traceless; Drawing on a dark surface is no longer a problem. Simple to use: each welder pencil has a built in sharpener, and the top has a clip that can be fixed to clothing, convenient for you to sharpen the refill quickly, bringing you a lot of convenience. Apply to various surfaces: almost any material surface or texture can be marked with this all purpose carpenter pencil, or rusted surfaces, smooth, bowl, dry, plastic, such as oily, icy, suitable for construction, wet, automobile, glass, metal, rough, wood and paper.

Brand	Gersoniel #ad
Manufacturer	Gersoniel #ad
Weight	0.33 Pounds
Part Number	OC-220427-A
Model	OC-220427-A

5. VEVOR

#ad

Steel Pipe Alignment Tool with Lightweight Design, 2 to 6 in, High Strength Ultra Clamp with Quick Acting Screws, VEVOR Pipe Clamp, Black

#adVEVOR #ad - Adjustment is simple and quick with our ultra clamp. Easy adjustment: maintain balance with the two wide grip plates while pressing the quick-acting Lever. It is fit for most common sized pipes or tubes and works great on all standard pipeline fit ups.

Lightweight & portable: the ergonomic two-hand operating handle for comfort and ease of use, and each joint is reinforced with rivets for durability. It has a powder coating finish to improve its usage lifetime, so you don't have to worry about it becoming rusted or falling apart. Applicable pipe size: the pipe clamp assures accurate fit-up of 2" - 6"/5.

1 - 15. 2 cm pipes. The screws smoothly glide up and down for fast pipe insertion and removal after welding. Perfect for pipefitting: the versatile ultra clamp can be used for multiple fit ups, pipe to fitting, including pipe to pipe, pipe to flange, and pipe to tee. Sturdy carbon steel: the durable pipefitter clamp is made of forged carbon steel.

Brand	VEVOR #ad
Manufacturer	VEVOR #ad
Height	3.9 inches
Length	12.2 inches
Weight	8 Pounds
Width	9.1 inches
Part Number	Ultra Clamp 2 in
Model	2" - 6" Ultra Clamp

6. REEPLAR

#ad

Measure Pipe Diameter Over 0.5" & up With 4" Y-Type Base and Adjustable Dial Bubble Protractor, Upgraded Pipe Center Finder, Measure Pipe Diameter, Pipefitter Tools With Centering Head

#adREEPLAR #ad - With just a few simple steps, place the tool on the pipe, you can use this pipe marker tool to find the angle you want and leave a fixed point mark on the pipe. Adjustable dial bubble protractor the 4 inch Y-type head is fitted with an adjustable dial bubble protractor DSL protractor for enhanced precision, ensuring accurate measurements every time.

Easy to usesimply loosen or tighten the hexagonal nut, and tap with a hammer to leave a fixed point mark on the pipe. Easily measure around pipes, making it a reliable tool for repair pipe work. It can measure tanks or pipes with a diameter of at least 1/2" or larger, mark butt-ins, Perfect for pipe fitters and welders. Reliable after sale guaranteewe are committed to providing our customers with the best possible service. Durable and sturdy materialmade of highly flexible material and High-quality metal raw materials, this pipe fitter tool is built to last.

We promise that you will no lose any money or suffer any inconvenience. If you encounter any problems during use, or if you receive any broken or chipped items, just one email, we will for you within 24 hours. You can request a replacement or a full refund. Effortlessly find pipe centersthis tool is perfect for pipefitters and welders to set center lines, locate points inside pipes or tanks, determine angles, and more.

Brand	REEPLAR #ad
Manufacturer	REEPLAR #ad
Height	1.4 Inches
Length	6.3 Inches
Width	4.2 Inches
Model	GDZX-11

7. jhtii

#ad

JHTii Pipe Wrap Around, Flex Angle Measuring and Marking Gauge

#adjhtii #ad - Performance: service temperature up to 177°C / 350°F. Scale design: pipe wrap around printed with a scale in inches, inch chart, tangent chart and other useful markings. Asbestos Free. Pipe wrap around dimensions: 3. 88" x 4' | pipe diameter: 3" to 6". Pipe measuring tool: economical welder and pipefitters lay out tool for marking straight lines around pipe or for use of a straight edge. Materials: pipe wrap made out of flexible gasket material with good resistance to heat and cold.

Brand	jhtii #ad
Manufacturer	jhtii #ad
Part Number	W6-RH0Q-EZUM
Model	jhtii-01

8. Flange Wizard

#ad

1/2", 1-7/16", Flange Wizard 8905 Two Hole Pipe Magician's Cases

#adFlange Wizard #ad - Brand name: Flange Wizard. Country of Origin: United States. Item dimensions: 05"l x 05"w x 05"h. Item weight: 05 lb.

Brand	Flange Wizard #ad
Manufacturer	Flange Wizard #ad
Height	0.5 Inches
Length	0.5 Inches
Weight	0.5 Pounds
Width	0.5 Inches
Part Number	8905
Model	8905
Warranty	Manufacturer

9. JACKSON SAFETY

#ad

Jackson Safety Flexible Wrap-A-Round Pipe Marking Tool, 14754, XL, 4" to 12" Pipe Diameter, Black

#adJACKSON SAFETY #ad - Use – printed with a scale in inches, an inch chart, tangent chart and other helpful markings to help you make a straight line around pipes. Ease of use – easy-to-use marking tool for pipe fitters and welders; makes quick measurements convenient on any job. Application – marking measures 5" to 7’ and designed for pipe diameter sizes 4" to 12". Great tool – economical tool for marking straight lines around pipe or for use of a straight edge prior to welding or cutting. Material – made from flexible gasket material with resistance to heat and cold.

Brand	JACKSON SAFETY #ad
Manufacturer	SureWerx #ad
Height	3 inches
Length	5.75 inches
Width	3.25 inches
Part Number	J3001860
Model	14754
Warranty	1 Year

30-90% Disocunts Found!

We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?

Show Discounted Products

Disclaimer: We earn small fee from purchases made on Amazon.