Top 9 Dei Heat Wrap – Automotive Replacement Exhaust Heat Wrap, Matting & Sleeving

As an Amazon Associate I earn from qualifying purchases.

1. Design Engineering

#ad

Design Engineering 010127 Titanium 2" x 50' Exhaust Heat Wrap with LR Technology

#adDesign Engineering #ad - Withstands 1800 degrees Fahrenheit direct heat and 2500-degree intermittent heat. High resistance to abrasions, oil spills, temperatures and vibration breakdown. Fit type: Universal Fit. Promotes increased flow for improved performance; reduces temperature & vibration breakdown. Extremely pliable for a tight and secure wrap. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability.

Brand	Design Engineering #ad
Manufacturer	Design Engineering #ad
Height	2.25 Inches
Length	11 Inches
Weight	0.9 pounds
Width	8 Inches
Part Number	10127
Model	10127
Warranty	Not applicbale

2. Design Engineering

#ad

Design Engineering 010003 Black Titanium 2" x 50' Exhaust Heat Wrap with LR Technology

#adDesign Engineering #ad - Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Extremely pliable for a tight and secure wrap. High resistance to abrasions, oil spills, temperatures and vibration breakdown. Promotes increased flow for improved performance; reduces temperature & vibration breakdown. Fit type: Universal Fit. Withstands 1800 degrees Fahrenheit direct heat and 2500-degree intermittent heat.

Brand	Design Engineering #ad
Manufacturer	Design Engineering, Inc. #ad
Height	10.94 Inches
Length	8.13 Inches
Width	2.38 Inches
Part Number	10003
Model	10003
Warranty	DEI warrants to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were originally installed. DEI’s obligation under this warranty shall be limited to the repair or replacement of parts that are determined by DEI to be defective, or refund of the products original purchase price, at DEI’s option, of the alleged defective product. We pledge that if at any time you encounter a problem with our products, we will strive to correct the problem in the most timely and efficient way possible, subject to the terms, conditions, and Limitations contained herein.

3. LEDAUT

#ad

Heat Shroud Sleeve Aluminized Sleeving Express Aluminized Hose and Silver Hose Wire Protection Barrier with Hook and Loop Closure, 3/4"I.D.x 10FT- 1" I.D.x 10FT

#adLEDAUT #ad - Tipsplease check the size of the products pictures, type and shape to make sure the aluminized sleeve is the one that you need. If you have any problems, take time to Contact With Us, We Are In 24 Hours Service ! Widely applicationsour heat shroud aluminized sleeving extremely pliable for a tight and secure wrap for expand and contract over fittings, oil spills, terminals and more.

High resistance to abrasions, cable, temperatures and vibration breakdown. Superb craftsmanshiptitanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Easy installationpliable for tight bends, you can trim to desired length, very easy to intall and use it.

High performance featuresize:width is 4. 1 inch105mm ，length is 118inch/10ft3m. Added convenience of a hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud sleeves around whatever needs protection and close the edges. Aluminized sleeving withstands 600 degrees F direct, continuous heat and 2000 degrees F radiant heat. But please stay away from open flames.

Brand	LEDAUT #ad
Manufacturer	LEDAUT #ad
Weight	0.42 Pounds
Part Number	LDLBMSTG3/4X10FT

4. LEDAUT

#ad

LEDAUT 2" x 50' Titanium Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties

#adLEDAUT #ad - 2"x50' titanium wrap with pack of 16 Stainless Steel304 Locking Ties. The exhaust heat wrap tape can withstand 1400F direct/2000F radiant heat. High resistance to abrasions, oil spills, temperatures and vibration breakdown. The thermal heat wrap reduces heat under hood up to 50% and improving car And motorcycle Performance. Titanium heat shield sleevevis made from crushed volcanic rock.

Brand	LEDAUT #ad
Manufacturer	LEDAUT #ad
Weight	2.4 Pounds
Part Number	HMHRT25017
Model	HMHRT25017

5. SunplusTrade

#ad

SunplusTrade 2" x 50' Black Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties

#adSunplusTrade #ad - Package includes one 2 inch x 50 feet heat Wrap with pack of 6 12" Stainless Steel 304 Locking Zip Ties. Universal fitment for cars and motorcycles performance parts. High resistance to abrasions, oil spills, temperatures and vibration breakdown. The exhaust heat wrap tape can withstand 1400F direct/2000F radiant heat. The thermal heat wrap can reduce heat under hood up to 50%.

Brand	SunplusTrade #ad
Manufacturer	SunplusTrade #ad
Part Number	1054-HEATWRPBLK
Model	1054-HEATWRPBLK

6. Design Engineering

#ad

2" x 15' Roll, Design Engineering 010396 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Roll

#adDesign Engineering #ad - Common uses include wrapping wire bundles, fuel lines, engine covers. Adhesive protected by a release liner rated up to 325 deegrees Fahrenheit. Easy to apply and remove. Highly conformable material that has a pressure sensitive adhesive backing.

Brand	Design Engineering #ad
Manufacturer	Design Engineering #ad
Height	0 Inches
Length	0 Inches
Weight	0.24 Pounds
Width	0 Inches
Part Number	10396
Model	10396
Warranty	Not applicbale

7. Design Engineering

#ad

Design Engineering 010402 Versa-Shield 7" x 24" Starter Heat Shield Wrap

#adDesign Engineering #ad - Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier. Withstands 500 degrees fahrenheit of direct heat and 2000 degrees Fahrenheit of radiant heat. Protect your starters from potential failure caused by under-hood heat soak conditions. 7-inch wide 24-Inch long. Easy to install with hook & loop closure system - no need to remove starter for installation. Additional uses include protecting master cylinders, cool cans, fuel pumps, distributors, and more.

Brand	Design Engineering #ad
Manufacturer	Design Engineering #ad
Height	11 Inches
Length	8.25 Inches
Weight	0.35 pounds
Width	1.25 Inches
Part Number	10402
Model	10402
Warranty	DEI warrants to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were originally installed. DEI’s obligation under this warranty shall be limited to the repair or replacement of parts that are determined by DEI to be defective, or refund of the products original purchase price, at DEI’s option, of the alleged defective product. We pledge that if at any time you encounter a problem with our products, we will strive to correct the problem in the most timely and efficient way possible, subject to the terms, conditions, and Limitations contained herein.

8. Design Engineering

#ad

Etc. with Hook and Loop Closure, Design Engineering 010478 Fire Wrap 3000 1" x 24" Heat Protection Sleeve for Wires, Hoses

#adDesign Engineering #ad - Withstands 500 degrees F direct heat. From high temperatures. Easy to install with hook & Loop closure; pliable enough to shape and fit the tightest bends. Use for bundling and protecting hoses, electrical wiring, etc. Provides burn protection during under-hood repairs and maintenance. Constructed of a woven insulated glass fiber braided sleeve heavily coated with 100% iron oxide silicone rubber; includes 16-inches Fire Tape.

Brand	Design Engineering #ad
Manufacturer	Design Engineering #ad
Height	0 Inches
Length	0 Inches
Weight	0.64 pounds
Width	0 Inches
Part Number	10478
Model	10478
Warranty	Manufacturer’s Warranty

9. Design Engineering

#ad

And Locking Tie Tool, Design Engineering 010095 Titanium Exhaust Heat Wrap Kit with LR Technology, 12 Locking Ties, 2 2" x 50' Rolls

#adDesign Engineering #ad - Kit includes all you need for any set of v8 headers: two 2" x 50' rolls of Exhaust Wrap, eight 8" and four 4" stainless steel Locking Ties, and Locking Tie tool. Extremely pliable for a tight and secure wrap. Promotes increased flow for improved performance; reduces temperature & vibration breakdown. Withstands 1800 degrees Fahrenheit direct heat and 2500-degree intermittent heat. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability.

Brand	Design Engineering #ad
Manufacturer	Design Engineering, Inc. #ad
Height	12.94 Inches
Length	7.5 Inches
Weight	2.15 Pounds
Width	2.5 Inches
Part Number	10095
Model	10095
Warranty	DEI warrants to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were originally installed. DEI’s obligation under this warranty shall be limited to the repair or replacement of parts that are determined by DEI to be defective, or refund of the products original purchase price, at DEI’s option, of the alleged defective product. We pledge that if at any time you encounter a problem with our products, we will strive to correct the problem in the most timely and efficient way possible, subject to the terms, conditions, and Limitations contained herein.