Top 10 27110 Reedy 0712mg Digital HV Metal Gear Servo – RC Servos

As an Amazon Associate I earn from qualifying purchases.

1. Power Hobbies


Powerhobby 729MBL Hige Voltage Waterproof Brushless Steel Gear High Torque 565 OZ/Speed .085 @ 8.4v Servo with Aluminum Case

Power Hobbies #ad - Torque 500 oz / speed 0100sec @ 7. 4v. Waterproof IP67. Ideal for 1/10, off road, 1/8 on road, truck/cars. High performance standard digital servo. Torque 565 oz / speed 0085sec @ 8. 4v.
BrandPower Hobbies #ad
ManufacturerPowerhobby #ad
Part NumberPH729MBL

2. Traxxas


Traxxas 3350R Velineon VXL-3s Brushless Power System

Traxxas #ad - Integrated two-stage low-voltage detection for lithium polymer lipo battery usage. Input voltage: nicad/NiMH 4-9 Cells 4. 8 to 108 volts dc; lipo 2-3 Cells 7.

4 to 11. 1 volts DC. Esc features 3 drive profiles: sport, Race, and Training Mode to limit throttle to 50% for inexperienced drivers. Widest range of battery options ranging from 4-cell NiMH or NiCad packs all the way up to 3S LiPo battery packs 11. 1 volt. Kit contains vxl-3s waterproof eSC, Velineon 3500 4-pole motor, and speed control mounting plate. Ultra high-temperature sintered Neodymium magnets provide massive torque and linear power.
BrandTraxxas #ad
ManufacturerTraxxas #ad
Height2 Inches
Length6 Inches
Weight1.07 Pounds
Width4.5 Inches
Part Number3350R
WarrantyNo Warranty

3. Traxxas


Traxxas 2085X Waterproof Digital High Torque Servo with Metal Gears Ball Bearing Fits X-Maxx

Traxxas #ad - Includes steering Link and servo Saver spring. Waterproof case. Metal gears and ball bearings. Digital high Torque servo. Fits traxxas X-Maxx.
BrandTraxxas #ad
ManufacturerTraxxas #ad
Height1 Inches
Length7.75 Inches
Weight0.23 Pounds
Width4.65 Inches
Part Number2085X
Warranty30 day warranty against manufacturer defects



AGFRC 19KG Low-Profile High-Torque Programmable-Digital-Servo, Full Metal Gear CNC Case Brushless Servo for 1/10 RC Models, Control Angle 180° A50BHL&AGF-SPV2

AGFRC #ad - Large torqueagfrc 19kg high torque brushless motor digital servo. The agf-spv2 only can be used for AGFrc servo with ASS mark. The maximum torque is up to 19 kg-cm 265 oz-in @ 8. 4v. Please read the instructions carefully before use.

High precisionadvanced linearity and accuracy with precision potentiometer with new design, low noise, IP65 waterproof, stable, dust-proof. Upgrade&progammablethe upgrade high speed servo is programmable by agf-spv2 servo programmer to change torque, etc. Dual ball bearing, Operating Speed: 0073 sec/60° @ 8. 4v. High quality&performanceequipped with stainless steel gear, which is low power consumption, full Aluminium housing can enhance the heat dissipation, service life has been greatly increased.

Operating Voltage: 4. 8v ~ 8. 4v. Software download required, angle, speed, and download link is on the cover. Application ideal for 1/10 on road vehicles, RC car, 1/10 helis, RC truck, and small planes. Dimension: 40
BrandAGFRC #ad
ManufacturerAGF-RC Electronic Technology CO.,Ltd #ad
Height1.04 Inches
Length1.61 Inches
Weight0.11 Pounds
Width0.8 Inches
Part NumberA50BHL
WarrantyManufacturer warranty for 1 year from date of purchase.



BETU 45Kg Coreless Servo Motor HV 8.4V, High Torque RC Digital Servo,Full Waterproof Servo, Stainless Steel Gear Servo with 25T Servo Horn(180°)

BETU #ad - Widely use digital servo: the steering servo control angle 180° compatible with 1/5, 1/10, 1/12 Truck, 1/8, RC Car / Robot / Boat and other remote control models. High speed servo standard size: 1. 57 x 078 x 1. 57 inch40 x 20 x 40 mm; Weight:2. 7oz 79g. Metal gear coreless servo: equipped with strong copper & Stainless Steel Gears, CNC aluminium Shell, Less Noise, light weight. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control. Waterproof servo: waterproof performance: IP67 Please watch the waterproof test video.
BrandBETU #ad
ManufacturerBETU #ad
Weight0.17 Pounds
Part NumberBETU45KGServo

6. Deegoo


4-Pack MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

Deegoo #ad - Stable and Shock Proof. The speed, Tension and Accuracy all increase. Positioning speed at 4. 8v without load 017s / 60 degrees.

Power supply: through external Adapter. Universally applicable: micro servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects. Torque at 6v 12kg/cm, 7. 2v 13kg/cm. Recommended voltage: 5v, current usage: 3A. The mg996r model compliant with most standard receiver connector, for Futaba, Hitec, Sanwa, GWS etc. This mg996r servo motor which updated from SG90 and MG90S micro servo motor. Coreless Motor, Metal Gear.
BrandDeegoo #ad
ManufacturerDeegoo #ad
Height1.38 Inches
Length2.2 Inches
Weight0.49 Pounds
Width1.93 Inches
Part Number4Pcs MG996R

7. Savox


Savox SC-1256TG High Torque Titanium Gear Standard Digital Servo

Savox #ad - Gear: titanium & aluminum, bearing: 2BB, case: Aluminum, 25 Tooth Spline. [email protected] 8/6. 0v oz-in: 222. 2/277. 7. Dimensionsmm: 403x202x37. 2, weightg:52. 4. [email protected] 8/6. 0v sec/60:. 18/. 15.
BrandSavox #ad
ManufacturerHRP (Prop Brands) #ad
Height1.47 Inches
Length1.59 Inches
Weight0.3 Pounds
Width0.8 Inches
Part NumberSC1256TG
Warranty1 year warranty against manufacturer defects



Magnetic Sensor Coreless Servo Full Metal Gear for 1/10 RC Car Boat Crawler, Control Angle 180° A73CHLW, AGFRC 32KG IP67-Waterproof Servo High-Torque

AGFRC #ad - Ideal for 1/10 rc crawlers, monster trucks, buggies, rc boats and other vehicles that require high level waterproof. Full metal case, 25T strengthen gear. Ip67 waterproof, high Torque 32KG, Coreless. Magnet angle Sensor for a longer using life. Any question feel free to contact AGFRC aftersale service.
BrandAGFRC #ad
ManufacturerAGF-RC Electronic Technology CO.,Ltd #ad
Height1.48 Inches
Length1.57 Inches
Width0.79 Inches
Part NumberA7CHLW
WarrantyManufacturer warranty for 1 year from date of purchase.



LJWRC DS3230MG 30KG Waterproof Metal Gear Digital Servo for 1/8 1/10 1/12 RC Cars 270 Degree

LJWRC #ad - Great choice for university professors and students who are interested in developing software for robot parts Tailored for RC hobbyist to provide different experience and delight.

Great choice for university professors and students who are interested in developing software for robot parts. Cnc aluminium middle shell enhances heat dissipation and ensures the servo motor can work well. High-precision metal gear with hard anodizing for better accuracy and longer service life,Water proof rubber seals screws, made of first-grade material ensure the longevity of the products. Size: 400*205*405mm operating speed 6. 8v : 017 sec/60 degree Stall torque 6. 8v : 34. 5kg/cm.
BrandLJWRC #ad
ManufacturerLJWRC #ad
Part Number25

10. LewanSoul


LewanSoul LX-16A Full Metal 17kg High Torque Serial Bus Servo Robotic Servo with Debug Board and Servo ControllerPack of 5, Control Angle 240

LewanSoul #ad - The top of the servo has a warning light, temperature, and the indicator will blink when overcurrent, over temperature or locked-rotor occurs. Age: 14 years and up. It's better for accuracy, service life has been greatly increased.

Simple wiring make product more simple, exquisite, attractive have been greatly improved! Accurate movement can satisfy the needs of making robots. 17kg large torque. Dual ball bearing: one is the driving ball bearing, one is the assistant ball bearingsupport role. Full metal gear. Real-time feedback of position, voltage. The control board use a i/o port to connect the serial servo, servos are connected in series through a dual interface, which reduce the use of serial ports. 15 kg·cm 208 oz·in @6. 6v; 17 kg·cm 236 oz·in @7. 4v. We provide communication protocol and detailed video tutorials.
BrandLewanSoul #ad
ManufacturerHiwonder #ad
Weight0.95 Pounds