IWISS 1/2-Inch Stainless Steel Cinch Clamp Pinch Rings for PEX Pipe,10PCS-PACK

#ad
#ad
IWISS TOOLS IWS-2 #ad - Do not use with PB tube Meets astm 2098. Interlocking ring that forms a complete 360-Degree watertight seal. Meets astm 2098 1/2-inch stainless steel cinch clamps 100/bag interlocking ring that forms a complete 360-Degree watertight seal Made of corrosion-resistant annealed 304 stainless steel Connection can be verified visually-tab of Cinch Clamp is "pinched" Perfect for connecting PEX to crimp type fittings in hard to reach spaces.

1/2-inch stainless steel Cinch clamps 10PCS-PACK. Simply pinch the tab closed with the CinchTool to make the connection. Perfect for connecting PEX to crimp type fittings in hard to reach spaces. Made of corrosion-resistant annealed 304 stainless steel.

More information about IWISS TOOLS IWS-2 #ad

IWISS PEX Clamp Cinch Tool Crimping Tool Crimper for Stainless Steel Clamps from 3/8"to 1" with 1/2" 20PCS and 3/4" 10PCS SS PEX Clamps

#ad
#ad
Iwiss FBA_Iwi-5581 #ad - Kit includes: 1 * cinch crimping tool 1 * calibration tool 10 * 3/4" Clamps20 * 1/2" Clamps Note:This tool is factory adjusted, you can directly use it. In the meanwhile, we offer one calibration tool incase you want to calibrate to make sure the correct installation. Iwiss pex clamp cinch tool crimping tool crimper for stainless steel clamps from 3/8" to 1" with 1/2" 20PCS and 3/4" 10PCS SS PEX Clamps IWISS Clamp Cinch Tool is used with Stainless Steel Clamps to make PEX connections.

You can directly use this tool without calibrationit's factory-adjusted, we also offer a calibration tool in case you want to have adjustment after longtime using. This tool can't fit zurn quick Clampnot ASTM F2098 standard Meet astm f2098. The ratchet safety-function bring fast and reliable installation.

IWISS PEX Clamp Cinch Tool Crimping Tool Crimper for Stainless Steel Clamps from 3/8"to 1" with 1/2" 20PCS and 3/4" 10PCS SS PEX Clamps #ad - The red rubber long handle save 30% labor and make it easy to operate. Features this tool is universal and will work with stainless steel clamps of sizes 3/8", 1/2", such like Sharkbite, 3/4" and 1"This tool can be used with any ASTM F2098 stainless steel clamps from any manufacturer, 5/8", Nibco and so on.

The head part is processed with Wire EDM machine, make sure to provide a precise installation. This cinch tool is universal and works with stainless steel clamps of sizes 3/8", 5/8", 1/2", 3/4" and 1". It can be used with any ASTM F2098 stainless steel clamps from any manufacturer. The ratchet safety-function bring fast and reliable installation.

More information about Iwiss FBA_Iwi-5581 #ad


Similar products



PEX Pipe Cutters for Cutting 1/8"-1" PEX Tubings, not for PVC Pipes

#ad
#ad
Iwiss Electric Co., Ltd 55045 #ad - Steel construction for strength3. Cuts pex pipes from 1/8"-1". This tool is factory adjusted and we offer a calibration tool in case you want to have adjustment after longtime using. Makes straight clean burr-frEE Cuts. Cuts pex pipe from 1/8"-1"2. Perfect for the diy home-owner or the professional looking for the perfect way to get started with PEX plumbing.

Handle latch keeps tool closedwarnings:always wear approved eye protectionNever use on or near live electrical circuitsDo NOT use to cut metallic pipes or cable wireDo NOT cut cold PEX Pipes Meet astm f2098. 1. Do not use to cut metallic pipes or cable wire. This cinch tool is universal and works with stainless steel clamps of sizes 3/8", 1/2", 5/8", 3/4" and 1".

PEX Pipe Cutters for Cutting 1/8"-1" PEX Tubings, not for PVC Pipes #ad - It can be used with any ASTM F2098 stainless steel clamps from any manufacturer. The ratchet safety-function bring fast and reliable installation. Spring loaded handle for quick opening/fast cutting.

More information about Iwiss Electric Co., Ltd 55045 #ad


Similar products



1/2 inch Pex Elbow 1/2" 1/2" pack of 8 Brass Crimp Fitting/Fittings PEX-E-0505

#ad
#ad
VIVO PEX-E-0505 #ad - Cuts pex pipes from 1/8"-1". 1/2" pex Elbow. Compatible with all major brands of 1/2 inch pex tubing. This cinch tool is universal and works with stainless steel clamps of sizes 3/8", 5/8", 1/2", 3/4" and 1". It can be used with any ASTM F2098 stainless steel clamps from any manufacturer. The ratchet safety-function bring fast and reliable installation.

Do not use to cut metallic pipes or cable wire. Spring loaded handle for quick opening/fast cutting. Made from brass. Perfect for the diy home-owner or the professional looking for the perfect way to get started with PEX plumbing. Pack of 8. Meet astm f2098. Pack of 8 ~ 1/2 Pex Elbow. Brass. This tool is factory adjusted and we offer a calibration tool in case you want to have adjustment after longtime using.

1/2 inch Pex Elbow 1/2" 1/2" pack of 8 Brass Crimp Fitting/Fittings PEX-E-0505 #ad - Makes straight clean burr-frEE Cuts.

More information about VIVO PEX-E-0505 #ad


Similar products



IWISS PEX Ratcheting CINCH Crimping Tool Crimper for Stainless Steel Clamps from 3/8"to 1" Fastening Tool

#ad
#ad
IWISS TOOLS KG1096 #ad - Kit includes: 1 * cinch crimping tool 1 * calibration tool This tool can be used with any ASTM F2908 stainless steel clamps from any manufacturer, such like Sharkbite, Nibco and so on. Spring loaded handle for quick opening/fast cutting. This tool can be used with any ASTM F2908 stainless steel clamps from any manufacturer.

1/2" pex Elbow. Iwiss clamp cinch tool is used with Stainless Steel Clamps to make PEX connections. Do not use to cut metallic pipes or cable wire. Brass. Meet astm f2098. Crimping range:3/8", 5/8", 1/2", 3/4" and 1". Steel stainless Clamps Cinch Tool. Cuts pex pipes from 1/8"-1". Two kind of packaging will be sent at random.

IWISS PEX Ratcheting CINCH Crimping Tool Crimper for Stainless Steel Clamps from 3/8"to 1" Fastening Tool #ad - Come with calibration tool and instruction. Note:this tool is factory adjusted and it will come with one calibration tool incase you want to calibrate to make sure the correct installation. Ratchet design releases when the Cinch Clamp tab is properly pinched. This tool is factory adjusted and we offer a calibration tool in case you want to have adjustment after longtime using.

Makes straight clean burr-frEE Cuts.

More information about IWISS TOOLS KG1096 #ad


Similar products



SharkBite UC248LFA10 1/2" 90 Degree Elbow PEX Barb Fitting 10-Pack, Brass

#ad
#ad
SharkBite UC248LFA10 #ad - Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Ratchet design releases when the Cinch Clamp tab is properly pinched. Meet astm f2098. This cinch tool is universal and works with stainless steel clamps of sizes 3/8", 1/2", 5/8", 3/4" and 1". It can be used with any ASTM F2098 stainless steel clamps from any manufacturer.

The ratchet safety-function bring fast and reliable installation. This tool can be used with any ASTM F2908 stainless steel clamps from any manufacturer. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing.

SharkBite UC248LFA10 1/2" 90 Degree Elbow PEX Barb Fitting 10-Pack, Brass #ad - Cuts pex pipes from 1/8"-1". 10 pack, secure barb ends of fittings to pex pipe with tv #608-933 cinch clamps and tv #608-743 cinch tool, meets the new nsf/ansi standard 14-2009 and astm f 1807-9si standard for products intended for the transport of potable water, 1/2", lead free brass Barb Insert Elbow, Immediately Testable To Well Over 100 PSI, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, Or Copper Crimp Rings and Crimp Tool, ANSI/NSF Standard 61 Annex G For Lead Free Compliance and The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.

25% of lead by weight to meet ab1953 california and VT S152 Vermont Low Lead Restrictions. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. This tool is factory adjusted and we offer a calibration tool in case you want to have adjustment after longtime using.

More information about SharkBite UC248LFA10 #ad


Similar products



1/2 inch Pex Tee 1/2" Tees"T" pack of 8 Brass Crimp Fitting/Fittings PEX-T-222

#ad
#ad
VIVO PEX-T-222 #ad - 1/2" pex Tee. This tool can be used with any ASTM F2908 stainless steel clamps from any manufacturer. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection.

Crimping range:3/8", 5/8", 1/2", 3/4" and 1". Steel stainless Clamps Cinch Tool. Ratchet design releases when the Cinch Clamp tab is properly pinched. Meet astm f2098. Do not use to cut metallic pipes or cable wire. This cinch tool is universal and works with stainless steel clamps of sizes 3/8", 1/2", 5/8", 3/4" and 1".

1/2 inch Pex Tee 1/2" Tees"T" pack of 8 Brass Crimp Fitting/Fittings PEX-T-222 #ad - It can be used with any ASTM F2098 stainless steel clamps from any manufacturer. The ratchet safety-function bring fast and reliable installation. Pack of 8. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. Made from brass. Come with calibration tool and instruction.

More information about VIVO PEX-T-222 #ad


Similar products



SharkBite UC334LFA Drop Ear Elbow, 1/2-Inch by 1/2-Inch

#ad
#ad
SharkBite UC334LFA #ad - 1/2" pex Elbow. Perfect for the diy home-owner or the professional looking for the perfect way to get started with PEX plumbing. Meet astm f2098. The sharkbite pex barb fittings are compatible for potable water distribution and hydronic heating applications. Pack of 8. Come with calibration tool and instruction.

Brass. Sharkbite pex barb drop ear elbows are used to transition from PEX, to NPT threaded pipe, such as shower arms or tub spouts. 1/2" pex Tee. Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Lead Free Compliant. Brass. Crimping range:3/8", 1/2", 5/8", 3/4" and 1".

SharkBite UC334LFA Drop Ear Elbow, 1/2-Inch by 1/2-Inch #ad - Steel stainless Clamps Cinch Tool. This cinch tool is universal and works with stainless steel clamps of sizes 3/8", 1/2", 5/8", 3/4" and 1". It can be used with any ASTM F2098 stainless steel clamps from any manufacturer. The ratchet safety-function bring fast and reliable installation. They are similar to female elbows, but have mounting ears with holes for securing to a surface, such as a stud or wall, and they provide additional stability.

Resists corrosion and scale build up.

More information about SharkBite UC334LFA #ad


Similar products



IWISS 10 PCS 3/4-inch PEX Stainless Steel Clamp Cinch Rings Crimp Pinch Fitting Tools-Packed in Waterproof bag

#ad
#ad
Iwiss Electric Co., Ltd #ad - Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project. Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.

1/2" pex Tee. This cinch tool is universal and works with stainless steel clamps of sizes 3/8", 1/2", 5/8", 3/4" and 1". It can be used with any ASTM F2098 stainless steel clamps from any manufacturer. The ratchet safety-function bring fast and reliable installation. Compatable product: use with sharkbite pex clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings.

IWISS 10 PCS 3/4-inch PEX Stainless Steel Clamp Cinch Rings Crimp Pinch Fitting Tools-Packed in Waterproof bag #ad - Ratchet design releases when the Cinch Clamp tab is properly pinched. Do not use to cut metallic pipes or cable wire. 10 pcs 3/4" stainless pex pinch clamps. Lead Free Compliant. 1/2" pex Elbow. Resists corrosion and scale build up. Come with calibration tool and instruction. This tool is factory adjusted and we offer a calibration tool in case you want to have adjustment after longtime using.

More information about Iwiss Electric Co., Ltd #ad


Similar products



1-inch Stainless Steel Pinch Clamp Tool - Apollo PEX 69PTKG1096 3/8-inch

#ad
#ad
CONBRACO 69PTKG1096 #ad - Meets astm f-1807n what's in the box:conbraco 69PTKG1096 Pex Quick Pinch Clamp Tool. Brass. Do not use to cut metallic pipes or cable wire. Conbraco pex Ratcheting Cinch Clamp Tool. 3/4 in. Not for use with Zurn Qickclamp crimp rings. No waiting for glue to dry or joints to cool. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection.

Ratchet design releases when the Cinch Clamp tab is properly pinched. Use with oetiker pex pinch clamps 3/8 in. 3/4 in. 1/2 in. And 1 in. Also for use on apollo pex and Murray pex pinch clamps 3/8 in. Barb system offers lowest material cost. Pack of 8. Crimping range:3/8", 5/8", 1/2", 3/4" and 1". Steel stainless Clamps Cinch Tool.

1-inch Stainless Steel Pinch Clamp Tool - Apollo PEX 69PTKG1096 3/8-inch #ad - Meet astm f2098. 1/2" pex Elbow. Perfect for the diy home-owner or the professional looking for the perfect way to get started with PEX plumbing.

More information about CONBRACO 69PTKG1096 #ad


Similar products



Watts P-960 J-Hook for 1/2-Inch PEX Pipe Support, 100-Pack

#ad
#ad
Watts P-960 #ad - This tool can be used with any ASTM F2908 stainless steel clamps from any manufacturer. Elbows: sharkbite fitting 1/2 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems. Affordable: low cost solution to connect PEX Pipe Tubing. Holds pex, copper, cpVC & Polybutylene to floor joists or rafters.

J-hook design makes supporting and removing pipe easy. Easy to use for contractors and homeowners. This tool is factory adjusted and we offer a calibration tool in case you want to have adjustment after longtime using. Makes straight clean burr-frEE Cuts. Spring loaded handle for quick opening/fast cutting. Meets to astm F2098.

Watts P-960 J-Hook for 1/2-Inch PEX Pipe Support, 100-Pack #ad - For supporting supply and return piping. Ratchet design releases when the Cinch Clamp tab is properly pinched. Barb system offers lowest material cost. No waiting for glue to dry or joints to cool. The sharkbite connection system is perfect for your next commercial or homeowner plumbing project. Lead free: all sharkbite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.

More information about Watts P-960 #ad


Similar products